Automatic powder painting coating line
|Payment Type:||T/T,Western Union|
|Terms of Trade:||FOB,CFR,CIF|
|Min. Order:||1 Set/Sets|
|Delivery Time:||45 Days|
|Place of Origin:||Shenzhen|
Model No.: HYJ-455
Equipment body size
1. Equipment length: 20m work area width of 15m
2. Working area: divided into three sections: one section: loading area, two sections: spraying area, three sections: baking area four sections: cooling discharge area
3 feeding operation area: 5000mm
4. Baking operation area: 8800mm
5. Baking area and cooling area spacing: 500 mm
6. Baking area: 8800mm
7. Cooling zone: 3000mm
8. Entrance height: 600mm-800mm
9. Entrance width: 450mm
Conveyor belt from the ground: 250mm (total height of the machine 1520 ± 30mm)
Equipment main structure
The main structure of 50 * 50 mm + a channel, no bad interface (nice).
Workspace Tunnel body: 1.2mm cold plate + paint closed cold-rolled steel
Work area Tunnel cavity: 1.0mm mirror steel Model: SUS316 #
Body support: Fang Tong a model: 50 * 50 "Fang Tong
Wind system: forced to carry 4 sets of wind fans
Insulation material: vacuum aluminum silicate + silk double type: 60K
Conveyor: track hanging
10. Balance device: ground screw
Electrical equipment part: (using PLC system automation control)
1. The main switch: 80.0A
2.Total power: 70.0KW
3. Transport motor: 750W (drive speed)
4. Forced circulation fan: HYJ-375w type
5. Cooling hair dryer: HYJ-100 type
6. Ammeter: 40A 4 sets
7. Voltmeter: 400V 1 set
8. Working voltage: 380V ± 5% three-phase five-wire system 50Hz
1. Liner a total of 4 sections of the furnace chamber, 2.2 meters each section of the furnace, combined into a total length of 8.8 meters;
2. Furnace cavity three sides shop 50㎜ high temperature insulation layer; Beam middle shop 60mm thick insulation layer;
3. Internal heat source installed on both sides, forced air circulation, the temperature uniformity control within ± 2.5 ℃;
4. Furnace chamber with control box, the use of Japan RKC temperature controller, the temperature RT ~ + 350 ℃ arbitrary adjustable, PID self-tuning function, automatic thermostat, with over-temperature power, over-temperature alarm, leakage protection and other functions ;
5. At the top of the furnace chamber equipped with wind motor, power 370W, with nine inches wind wind wheel;
6. Configure the control panel 1 set
Four: standard configuration
1. a product manual
2. a product warranty card
Fifth, safety devices
Overvoltage and overcurrent protection
2. Fault alarm prompts
3. Equipment overload protection
4. Emergency stop protection
5. Over-temperature prevention device (to protect the test object and test box)
6. Motor (blower) overload thermal relay (to protect the blower overload)
7. Protection of the motor phase loss circuit breaker
Six, warranty period description
1) In the normal use of equipment maintenance, machine warranty for 1 year, during the warranty period by the B is responsible for free warranty.
2) During the warranty period, the non-wearing parts in the unit are damaged or invalid under normal use, and Party B will be replaced free of charge.
3) During the warranty period, Party B shall be obliged to carry out repairs regardless of any breakdown or damage to the equipment provided. Party B shall send personnel to verify on site whether the components of the equipment are normally used or not, and written reports are issued on site Clarify the reasons and reasons. Confirmed by both parties. (Man-made damage to our company to charge the appropriate fees) If our engineers and technicians have sufficient reason to prove that man-made damage and Party A refused to sign, I Division have the right to refuse to perform the maintenance within the obligation. At the same time termination of warranty. Division I no longer bear any responsibility.
Shenzhen Heng Yi Jia Technology Co., Ltd.
Shenzhen Heng Yi Jia Technology Co., Ltd. has focused on paint spraying equipment for over20 years in China. We started as a small operation, but now have become one of the leading painting line suppliers in the coating industry in China.
Today,Shenzhen Heng Yi Jia Technology Co., Ltd. has been one of the top producers of quality automatic spraying line and new technologies, such as: automatic paint spraying line, UV paint spraying line(uv lines), spray chrome line, mini auto painting line, spray chrome equipment and accessories of coating equipment of vacuum metallizing machine(metallizer), Automatic UV plating vacuum line, spray booth, coating chain, UV curing oven, automatic spray chrome equipment&line, spray powder coating line & equipment and so on.
Shenzhen Heng Yi Jia Technology Co., Ltd. is located in the China The beautiful coastal city-Shenzhen. As a global supplier in auo paint spraying line, UV paint spraying line, mini auto painting line, spray chrome line, spray chrome equipment and accessories of coating equipment. Heng Yi Coating Technology is to create added value for customers around the world.
Our products includes the following:
1, Automatic paint spraying line
2, UV paint spraying line
3, Mini automatic paint spraying machine
4,small automatic spray coating machine
5.UV spray coating line
6. automatic spray painting line
7.Industrial tunnel oven
9.UV curing machine
We supply coating products all over the globe to a wide range of companies worldwide, ranging from large multinational organizations to small individual companies.
Spray painting plant for Industry use are widely used in the following industry, such aspackage coating plant:
--- Glass packages coating for cosmetics, perfume, wine, caps, bottles and other parts
---Painting plant for product paint surface finishing
---Vacuum coating plant
Spray chrome equipment with formula which from our second production line, are widely used for cmetallzing oating, and vacuum coating machine etc.
We always feel that all success of our company is directly related to the quality of the products we offer. They meet the highest quality requirements as stipulated in ISO9001, ISO14000:14001 quality control system, CE certificate, etc.
We are capable of mixing and producing an paint spraying line, UV lines and offer some of the most advanced manufacturing capabilities available, including vacuum coating machine, mini paint spray machine and spray chrome machine etc.
We have customers from both domestic market and oversea market.Heng Yi Jia Technology Sales managers can speak fluent English for good communication. Our main sales market:
China : 50%
Our service for coating equipment.
Besides our existing molded spray painting line, auto paint spray line, uv paint line, mini paint spray line, spray chrome machine, also can produce other coating line according to the drawings from our customers. We control the product quality critically for every step during the manufacturing from custom coating equipment. We offer technical support that is second to none. installation at local.
- Company Name: Shenzhen Heng Yi Jia Technology Co., Ltd.
- Representative: Wu Juhua
- Product/Service: Powder coating machine , Automatic Spray painting coating Line , UV Coating machine Line , small automatic spray coating machine , tunnel oven , semi-automatic spray coating line
- Capital (Million US $): 50万
- Year Established: 2016
- Total Annual Sales Volume (Million US $): Below US$1 Million
- Export Percentage: 81% - 90%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 5
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 3,000-5,000 square meters
- Factory Location: No.2 Street 5 Lao Keng Industrial Zone Keng Zi Shenzhen China
- Contact Person: Ms. Demi Wu
- Tel: +86-755-29492864
Premium Related Products